TREBLAB J1 Renewed

Does the battery life on the headphones show on android phones?

Depending on the model of your phone, it may show the battery drainage level. But even if it wasn't shown automatically, there are some apps on the Play Market, which may help for this purpose.

How do I manage cable with single cable clip?

 The cable clip is used to adjust the length of the cord around the neck. Basically, it fastens the cord between the earbuds and reduces its length. For using a cable clip, you need to put the connection cable in the gaps of the grooved plastic piece. You will have a cable loop, and by holding the clip with one hand and pulling the loop with another hand, you can adjust the size of the connection cable.

Is this splash and Rain proof?

Treblab J1 is rated ipx6 and hold splashes or rain. They are sweatproof and water-resistant.

How do you use the cord minder

The cable clip is used to adjust the length of the cord around the neck. Basically, it fastens the cord between the earbuds and reduces its length.   For using a cord minder, you need to put the connection cable in the gaps of the grooved plastic piece. You will have a cable loop, and by holding the clip with one hand and pulling the loop with another hand, you can adjust the size of the connection cable.  

What's the trick to opening the charging port?

The charging port in model TREBLAB J1 is located on the remote control. It has a rubber seal which covers the port. For your convenience, you may use a pin or the other little object to pull the seal up.   If

I recently purchased a pair of your J1 earphones and am loving them! Just one quick issue is I'm not sure how to use the cable clip, I would like to think it's pretty simple but never having a pair of earphones like these I would appreciate some help or instructions on how to properly use the cable clip. Any advice is appreciated. Thank you.

The cable clip is used to adjust the length of the cord around the neck. Basically, it fastens the cord between the earbuds and reduces its length.   For using a cord minder, you need to put the connection cable in the gaps of the grooved plastic piece. You will have a cable loop, and by holding the clip with one hand and pulling the loop with another hand, you can adjust the size of the connection cable.

How does one shorten the cable so that it fits well around my neck and doesn't droop. How does one use the included cable clip?

The cable clip is used to adjust the length of the cord around the neck. Basically, it fastens the cord between the earbuds and reduces its length.    For using a cord minder, you need to put the connection cable in the gaps of the grooved plastic piece. You will have a cable loop, and by holding the clip with one hand and pulling the loop with another hand, you can adjust the size of the connection cable.

how do you change the fins there is nothing about changing fins and eartips etc

To change the fins, please remove the ear tip from the earbud. Holding the earphone with one hand, gently pull the ear fin of the earphone using the other hand. Apply some pressure and with clockwise circular motions, twist the ear fin until it has finally gone off the driver of the earphone.   To seat the ear tip firmly try gently pulling on the outer rim of your ear to ease the tip into a comfortable position.

How is the microphone quality .?

TREBLAB have СVС 6.0 noise-cancellation technology in the built-in Mic to make phone conversations clearer. Our customers are happy with a microphone quality of our headphones including model J1. 

Would the trelab j1s work with an iPhone 7

TREBLAB earphones easily connect with all Bluetooth enabled devices. Including iPhone 7.

If paired to multiple devices, can I listen to music from laptop and take a call from phone if a call comes in or do you have to switch pairing?

TREBLAB J1 remember both devices paired but you need to switch a connection between them.

Do the earbuds come in extra small?

TREBLAB J1 comes with 2 sets of the ear tips (silicone and foam). Each set has 3 sizes (small, medium and large).

is there full volume synchronization with iOS?

TREBLAB J1 is compatible with iOS. But kindly note that an equaliser on your device and additional apps installed for managing the sound can give the difference in the final sound volume and quality. 

Any idea if these earbuds will work with the Fitbit Ionic smart watch?

TREBLAB earphones easily connect with all Bluetooth enabled devices. 

You can learn how to connect TREBLAB earphones to your device below: 

1. Set the buds to discovery mode, by pressing and holding the home button until you see blue and red led’s flashing. 
2. Find “TREBLAB” in your Bluetooth menu on your device and click “TREBLAB”. 

What is the charging time of these headphones?

The charging time of TREBLAB J1 is about 2 hours.

What is the driver size of the j1?

The J1 driver size is 6 mm (0.2 inch).

I want to use these at work as ear protection. I work in landscaping and the equiptment I use is around 85 db. How much sound will the noise reduction reduce, can I use these as ear protection?

TREBLAB J1 earphones have Passive Noise Cancellation to help dismiss the din of the outside world. Passive noise-canceling is also known as noise isolation and it works by blocking some background noise because the shape of the earbuds forms a seal inside your ears that helps to prevent noise from getting in. As a result, finding the correct size expandable foam ear tips is key for blocking out unwanted sound.

Do these have a Noise Reduction Rating (NRR)?

TREBLAB earphones are featured with Passive Noise Cancellation to dismiss the din of the outside world. Passive noise-cancelling is also known as noise isolation and it works by blocking some background noise by the shape of the earbuds forming a good seal inside your ears to prevent the noise getting in. I'd like to emphasize that correct size of the expandable foam ear tips is the critical point in this matter. Using the right size of the ear tips will block the unwanted sound.   Additionally, TREBLAB have СVС 6.0 noise-cancellation technology in the built-in Mic to make phone conversations clearer.

Can you tell me the decibel level for the J1, XR500, and XR800? I want as much volume as I can get.

The decibel output of the J1, XR500 and XR800 is as follows:

J1 - 110 +/- 3DB
XR500 - 102 +/- 3DB
XR800 - 102 +/- 3DB

How to order replacement eartips

If your purchase is still under the warranty, please do not hesitate to contact us via support@treblab.com. Kindly provide us with the order details in the message and we will be able to send you a pair of the silicone ear tips free of charge.

If charge time is 2 hours, what is the drain time at full volume?

The battery of TREBLAB J1 lasts up to 9 hrs. However, there are some points that can reduce it, for instance, listening to music and answering phone calls at the same time, the volume of the music or phone conversations, etc.  Please note, that the maximum battery life is obtained when the conditions are ideal: - 60% of maximum volume; - good Bluetooth connection. The strength of signal can shorten the average time (when you are far from the source device, or there are a lot of obstacles and/or something interferes the signal ); - charging the earphones as per instruction (do not overcharge them).

How much Bass do they Deliver?

They provide an amazing quality of sound and comfort and come with magnetic heads that prevent the loss of the product. J1 has the best sound quality as they support aptX technology, which compensates for the sound quality loss due to Bluetooth.
The decibel output for J1 is 110 +/- 3DB. Frequency response: 20Hz-20kHz, Frequency range: 2.4GHz-2.48GHz  

What is the frequency response on the J1 and the X5?

The frequency response on both earphones is 20 Hz – 20 kHz.

how do I turn the headphones off?

In order to turn the earphones off, please long press the power button for two seconds.

is it compatible with google pixel

Yes, TREBLAB earphones easily connect with all Bluetooth enabled devices, including Google Pixel.   You can learn how to connect TREBLAB earphones to your device below:   Set the buds to discovery mode, by pressing and holding the home button until you see blue and red led’s flashing. Find “TREBLAB” in the Bluetooth menu on your device and click “TREBLAB”. Enjoy your favorite music wirelessly with your TREBLAB earbuds! :)

Can you skip music tracks using the control on th eheadset?

To skip the song please long press the +/- button on the remote control panel of J1.

What is the diameter size (in millimeters) of the earphone nozzles on the Treblab J1?

The nozzle size of the J1`s is 4 mm.

Is it compatible with iMac? I want it for my mac use just wanted to know if it is compatible?

TREBLAB earphones easily connect with all Bluetooth enabled devices.